Experience the legendary Audi Sport Quattro S1 as an RC model, developed and tested over two years for ultimate performance. Accelerating from 0 to 107 km/h in just 3.5 seconds, this powerhouse delivers the raw speed and adrenaline rush of the real Group B rally icon. Precision engineering and high-performance components make every drive feel like a true motorsport experience.
Key Features:
• This car handles like a true 550 PS monster, now available in remote-controlled form
• It represents the pinnacle of our motor lineup, offering two gear ratio options for rally racing or circuit tracks, pre mounted pinion gear (24T 48P), as well as another 29T pinion gear for Vmax (not assembled)
• With a top speed of 107 km/h in the high gear setting, this car delivers thrilling performance
• Electronically configurable characteristic curves, pre-programmed by the manufacturer with a turbo boost effect based on the K27 Turboboost from KKK Turblader
| Content quantity |
The ready-to-run vehicle includes all components required for immediate use, except for the battery, which is available as an optional variant. |
| Power |
Electric |
| Scale |
1/10 |
| Size length |
470mm |
| Size width |
Chassis width 185mm/ body width 200mm |
| Size height |
155mm |
| Net weight |
1919 grams |
| Wheelbase |
Adjustable wheelbase approximately 255mm - 260mm |
| Tyres |
Foam Tyres: 30 mm front and rear for excellent grip |
| Tyre type |
FoamGrip3035 RO.BY Tyres/ wheels: 30/68mm (pre-mounted) 1/10 |
| Mudflap |
Front and rear mudflap set |
| Chassis |
Robust 2.0mm anodized aluminium chassis with side protection / Adjustable suspension |
| Cover |
Transparent polycarbonate (LEXAN®) chassis inner mud cover |
| Engine |
HOBBYWING 3665SD-4000KV |
| Max. engine rpm |
50400 rpm |
| Engine size |
65.8mm * 37mm |
| Engine mount |
Anodized adjustable 7075-T6 aluminum engine mount / Mid-motor concept |
| Engine cover |
Dust and water protection for engine and ESC |
| Max. speed |
107 km/h |
| Engine upgrade |
No upgrade possible |
| Suspension arm /Wishbone |
Wishbones with oil-filled shock absorbers |
| Ball bearing |
Full set/ sealed ball bearings |
| Wheel suspension |
12mm hex/ Independent suspension front and rear |
| Bumper |
Front bumper with foam |
| Wheel alignment |
Front and rear track width is adjustable |
| Camber alignment |
Front and rear camber is adjustable |
| Drivetrain |
4WD/ Aluminium center prop shaft |
| Driveshaft |
Front and rear rebuildable CVA type driveshafts |
| Differential |
Front and rear oil-filled differentials with metal gears |
| Barrier effect |
Differential locking effect adjustable with different oils |
| Stabilizer |
Stabilizers included in hardness level 1.8 mm front / 1.6 mm rear |
| Suspension strut |
Adjustable spring seat |
| Shock absorber |
Aluminum, oil-filled threaded shocks |
| Shock tower |
Front and rear 3mm Fiberglas shock tower |
| Pinion gear |
Pinion gear (24T 48P) and (29T) for Vmax |
| Pinion gear cover |
Easy access spur and pinion gear covers |
| Reduction ratio |
2,5 : 1 |
| ESC (Electronic Speed Controller) |
HOBBYWING EZRUN MAX 10 G2 |
| Controller voltage |
3S LiPo / 12.6 Volt |
| ESC (Electronic Speed Controller) Cover |
Removable ESC tray/ dust and water protection for engine and ESC |
| Servo |
SRT Coreless Servo HV Low Profile 11.0kg/0.06sec @7.4V |
| Servo mount |
Floating servo mount |
| Battery |
3S LiPo Battery RC 11.1V 100C 5400mAh |
| Battery mount |
Quick release battery retainer strap |
| Transmitter/ Receiver |
Transmitter P32-S 4-channel 91803G-C Remote control + Receiver (RX41) |
| Screws |
Grade 12.9 alloy steel screws |
| Please note that the images provided may differ from the actual delivered goods. |
| Warning! Not suitable for children under 14 years. Use under the direct supervision of adults. |
| Important notice: This vehicle is not suitable for beginners. |
